板バンド
【Characteristics】
●Primarily used in automobiles.
●Used on low-pressure hoses.
●Placement is made simple due to a positioning slot.
●Separate installation of a plate spring developed at Kyoei reduces torque reduction due to age-related degradation.
●Clamping torque and force control settings are possible with separate, specialized processing.

【Picture】
板バンド

【Specifications】

Plate Bands Measurement Chart (Units: mm)
Size Number Name D L S M t N D Mass (g) D1
Reference
Standard Measurement Tolerance
(1-3800M5-10) 38 38 +1.0
0		 30 16 14 1 7 M5×0.8 19.4 35
(1-4000M5-10) 40 40 20.1 37
(1-4300M5-10) 43 43 21.1 40
1-4500M5-10 45 45 21.1 42
(1-4800M5-10) 48 48 22.8 45
1-5000M5-10 50 50 23.6 47
1-5300M5-10 53 53 24.6 50
1-5500M5-10 55 55 25.3 52
1-5800M5-10 58 58 26.3 55
1-6000M5-10 60 60 27.0 57
1-6300M5-10 63 63 +1.5
0		 28.0 60
1-6500M5-10 65 65 28.7 62
(1-6800M5-10) 68 68 29.8 65
1-7000M5-10 70 70 30.4 67
1-7300M5-10 73 73 31.5 70
1-7600M5-10 76 76 32.6 73
1-7800M5-10 78 78 33.2 75
1-8000M5-10 80 80 33.9 77
1-8300M5-10 83 83 35.0 80
1-8500M5-10 85 85 35.6 82
1-8800M5-10 88 88 36.7 85
1-9000M5-10 90 90 37.2 87
1-9500M5-10 95 95 39.4 92
1-9800M5-10 98 98 - 95
1-103M5-10 103 103 - 100
Remark 1: Ring will noticeably deform into an elliptical shape if tightened further than the D1 measurement. Caution is advised.
Remark 2: No performance records exist for clamps with size numbers set in parentheses. Caution is advised.
Remark 3: D1 represents diameter with the bolt set at about S/2.